XL EVAPORATIVE COOLING PRODUCTS
MAINTENANCE
S140-600 IOM (NOV 07)
Page 17
SPARE PARTS
Frick
®
recommends that the customer maintain the following spare parts “in stock” for the Evaporative Condenser. By maintaining
this inventory of spare parts, continuous unit operation will be ensured.
Contact your local Frick representative for pricing.
The type and recommended stock level for each part is listed below.
MODEL SERIAL NUMBER
PART NUMBER RECOMMENDED STOCK LEVEL
*FAN BELTS - __________________________________________________ One Set
*FAN BEARINGS - _______________________________________________ One Set
FAN BUSHING - ________________________________________________ One Set
MOTOR BUSHING - _____________________________________________ One Set
FAN SHEAVE - _________________________________________________ One Set
MOTOR SHEAVE - ______________________________________________ One Set
FLOAT VALVE ASSEMBLY - _______________________________________ One
SPRAY NOZZLES - ______________________________________________ One Set
*FAN MOTOR - _________________________________________________ One Set
*SPRAY PUMP - ________________________________________________ One
FAN SHAFT - ___________________________________________________ One
* Parts noted to be considered as critical components to be stocked by customers to ensure continuous unit operation.
To Next Page
Loading...
Need help?
General
