Table 9: FX-PCV1615/1626/1628/1630 Controller Accessories (Order Separately)
Product code number Description
Mobile Access Portal (MAP)
Gateway
Refer to the Mobile Access Portal Gateway Catalog Page (LIT-1900869)
to identify the appropriate product for your region.
FX-DIS1710-0
Local Controller Display
FX-BTCVTCBL-700 Cable Replacement Set for the FX-BTCVT-1 or the NS-ATV7003-0;
includes One 1.5 m (5 ft) Retractable Cable
Y64T15-0 Transformer, 120/208/240 VAC Primary to 24 VAC Secondary, 92
VA, Foot Mount, 72.2 cm (30 in.), Primary Leads and 76.2 cm (30 in.)
Secondary Leads, Class 2
Y65A13-0 Transformer, 120 VAC Primary to 24 VAC Secondary, 40 VA, Foot
Mount (Y65AS), 20.32 cm (8 in.), Primary Leads and 76.2 cm (30 in.)
Secondary Leads, Class 2
Y65T42-0 Transformer, 120/208/240 VAC Primary to 24 VAC Secondary, 40 VA,
Hub Mount (Y65SP+), 20.32 cm (8 in.), Primary Leads and Secondary
Screw Terminals, Class 2
Y65T31-0 Transformer, 120/208/240 VAC Primary to 24 VAC Secondary, 40
VA, Foot Mount (Y65AR+), 20.32 cm (8 in.), Primary Leads and
Secondary Screw Terminals, Class 2
AP-TBK1002-0 2-position Screw Terminal that plugs onto FX-PCV Output Point
Spade Lugs
AP-TBK1003-0 3-position Screw Terminal that plugs onto FX-PCV Output Point
Spade Lugs
AP-TBK4SA-0 Replacement MS/TP SA Bus Terminal, 4-Position Connector, Brown,
Bulk Pack of 10
AP-TBK4FC-0 Replacement MS/TP FC Bus Terminal, 4-Position Connector, Blue,
Bulk Pack of 10
AP-TBK2PW-0 Replacement Power Terminal, 2-Position Connector, Gray, Bulk Pack
of 10
AS-CBLTSTAT-0 Cable adapter for connection to 8-pin TE-6700 Series sensors
F-1000-325 Replacement Barbed Fitting for use on FX-PCV1615, FX-PCV1630,
and FX-PCV1832 for Connecting Tubing, Bulk Pack of 10
F-1000-326 Flexible Tubing Extension with Barbed Fitting for FX-PCV1615, FX-
PCV1630, and FX-PCV1832, 35.56 cm (14 in.) Length, Bulk Pack of 20
FX-PCVACT-701 FX-PCV Actuator Assembly Gearbox Replacement Kit
TL-BRTRP-0 Portable BACnet/IP to MS/TP Router
FX-PCV1615/1626/1628/1630 Programmable VAV Box Controllers Installation Instructions26