106
Hardware Installation—Installing the
IFC-1010/2020
Provides eight Style B (Class B) or four Style D (Class A) Initiating
Device Circuits supports conventional two wire smoke detectors and
normally-open contact devices such as pull stations, waterflow and
supervisory switches, and four wire smoke detectors; XPM-8L supports
contact devices and Style B wiring only.
Provides eight Form-C relays. The XPR-8 may be configured to provide
four dual Form-C relays for use in dual channel audio selection
applications. (May be power-limited or non power-limited depending on
relay connection).
Note: For more information, refer to XP Transponder Technical Bulletin
(LIT-448180).
XPM-8/XPM-8L
Monitor Module
(Power-limited)
XPR-8 Relay
Module
To Next Page
Loading...
