Hardware Installation—Installing the IFC-1010/2020
11
It is imperative the installer understand the requirements of the Authority
Having Jurisdiction (AHJ) and review the following documents for
applicability:
•
NFPA 72 National Fire Alarm Code 1993
•
NFPA 90A Air Conditioning and Ventilating Systems - 1993
•
NFPA 92A Smoke Control Systems - 1988
•
NFPA 92B Smoke Management Systems in Malls, Atria,
Large Areas - 1991
•
UL 916 Energy Management Systems
•
UL 1076 Proprietary Burglar Alarm Units and Systems
•
UL 1610 Central Station Burglar Alarm Units
•
CAN/ULC - S527 - M87 Standard for Control Units for Fire Alarm
Systems
•
EIA-232E Serial Interface Standard
•
EIA-485 Serial Interface Standard
•
NEC Article 300 Wiring Methods
•
NEC Article 760 Fire Protective Signaling Systems
•
UL 38 Manually Actuated Signaling Boxes
•
UL 217 Smoke Detectors, Single and Multiple Station
•
UL 228 Door Closers-Holders for Fire Protective Signaling Systems
•
UL 268 Smoke Detectors for Fire Protective Signaling Systems
•
UL 268A Smoke Detectors for Duct Applications
•
UL 346 Waterflow Indicators for Fire Protective Signaling Systems
•
UL 464 Audible Signaling Appliances
•
UL 521 Heat Detectors for Fire Protective Signaling Systems
•
UL 864 Standard for Control Units for Fire Protective Signaling
Systems
•
UL 1481 Power Supplies for Fire Protective Signaling Systems
•
UL 1638 Visual Signaling Appliances
•
CAN/ULC - S524 - M91 Standard for Installation of Fire Alarm
Systems
•
Local and state building codes
Fire Alarm and
Related Service
Standards
To Next Page
