To Next Page

To Previous Page

Operating manual - SAB 120-151 A-frame (including ATEX)

16/61

008668 en 2019.08

Compressor unit identification

3.4 Compressor name plate - ATEX

Fig. 6: Name plate for an ATEX compressor

The ATEX compressor name plate contains this information:

Model no.

Manufacturer type designation.

Part no.

Manufacturer part number.

Serial no.

Compressor manufacturing number.

Max. driver speed - rpm

Maximum number of revolutions allowed.

Max. allowable pressure - psig/

bar

Maximum working pressure of compressor (psig/bar).

Assembled in

Manufacturing country.

Table of Contents5
Introduction to Operating Manual7
Compressor Name, Sabroe/Frick8
Amendments to the Manual8
Safety Precaution Definitions Used in this Manual10
Requirements for Competent Persons10
Areas of Application11
Application of the Screw Compressor11
Application of Combustion Engines11
Compressor Unit Identification12
Identification of Johnson Controls Denmark Equipment12
Unit/Pipe System Name Plate13
Compressor Name Plate15
Compressor Name Plate - ATEX16
Labelling of Explosion-Proof Equipment17
Vessel Name Plate18
Safety Precautions19
Signs19
During Operation20
Safety During Maintenance and Service21
Electrical Installations22
Lubricating Oils22
Purging a Refrigeration Plant23
F-Gas Regulation (Fluorinated Greenhouse Gases)23
Sound Measurement and Noise Data25
Noise Data25
Noise Data for SAB 120-15125
Installation26
Operating Instructions27
Description of Unit27
Principle P&I Diagram29
P&I Diagrams - Liquid Injection, Single and Dual Port31
Valve Positions During Operation32
Description of Main Components and Systems34
Compressor34
Compressor Lubrication System35
No Pump Oil System35
Demand Pump Oil System35
Cold-Start System36
Compressor Oil Separation System36
Automatic Oil Return Valve38
Compressor Hydraulic System39
Capacity Control39
Volumizer II VI Control40
Compressor Oil Cooling System41
Single-Port Liquid Injection41
Dual-Port Liquid Injection41
Suction Check Valve Bypass41
Heating Element42
Start-Up42
Initial Start-Up Procedure42
Normal Start-Up Procedure44
Stopping Routine44
Long-Term Storage44
Troubleshooting46
Maintenance Instructions51
Maintenance of Compressor Unit51
Maintenance Intervals52
Monitoring of Operation53
Oil55
Oil Charge55
Charging Compressor with Lubricating Oil56
Motor57
Final Disposal58
Safety Precautions58
Waste Disposal58
Compliance59
Declaration of Conformity59
Index60

Brand	Johnson Controls
Model	SABROE SAB 120 L
Category	Air Compressor
Language	English

Johnson Controls SABROE SAB 120 L User Manual

Table of Contents

Questions and Answers:

Johnson Controls SABROE SAB 120 L Specifications

Related product manuals