JOHNSON CONTROLS
3
FORM 150.62-NM6 (103)
3
CAUTION identies a hazard which could lead to damage to the machine,
damage to other equipment and/or environmental pollution. Usually an
instruction will be given, together with a brief explanation.
NOTE is used to highlight additional information which may be helpful to
you.
CHANGEABILITY OF THIS DOCUMENT
In complying with YORK’s policy for continuous product improvement, the infor-
mation contained in this document is subject to change without notice. While YORK
makes no commitment to update or provide current information automatically to the
manual owner, that information, if applicable, can be obtained by contacting the
nearest YORK Engineered Systems Service ofce.
It is the responsibility of operating/service personnel to verify the applicability of
these documents to the equipment in question. If there is any question in the mind
of operating/service personnel as to the applicability of these documents, then prior
to working on the equipment, they should verify with the owner whether the equip-
ment has been modied and if current literature is available.
To Next Page
Loading...
Need help?
General
