Johnson Controls York YKN2Open board User Manual

8.1 YKN2Open board
Based on the N2 Open protocol.
The following table lists all the communication variables, which indicate:
• The type of variable.
• The ID number.
• The description.
• The range.
• The units.
N O T E
Configure the network address.
The indoor YKToolN2 tool is required to configure the network address of the different YKN2Open
boards of an installation managed by communications.
Communications
8
YKN2Open board 8.1
33

Johnson Controls York YKN2Open board Specifications

General

Brand	Johnson Controls
Model	York YKN2Open board
Category	Controller
Language	English