Name: Johnson JPE-5100
Brand: Johnson
Rating: 4 (1 reviews)

To Next Page

To Previous Page

POLY V BELT 430J8 REPLACEMENT PROCEDURE (JPS)

Tools required:

u Philips

screwdriver

u Hex key (4mm)

u Open end

wrench (14mm)

Procedure:

7. Tighten the screws holding the both-end bearing housings

to the frame.

8. Tighten the screws in both the chain tension springs.

9. Tighten the screws that hold the bearing housing to the

frame.

10. Install the 430J8 & 430J6 belts onto the front and rear

pulleys.

11. Install the side covers.

3-13 Revision: 1.0 Date: 2001/06/01

Questions and Answers:

Need help?

Do you have a question about the Johnson JPE-5100 and is the answer not in the manual?

Johnson JPE-5100 Specifications

General