notify the platform to update the password.
Dynamic password associated fence
unlock
In the custom fence, the platform sends a
dynamic password to unlock.
RFID authorization card unlock
Use authorized RFID card, swipe card to
unlock.
RFID authorization card associated
fence unlock
The authorized RFID card can only be
unlocked inside the fence.
Support the configuration of 500
authorized RFID cards for unlocking
Used to configure 500 RFID cards with
authorized unlocking
10 polygonal electronic fences
A fence can support up to 50 location nodes.
Insert the lock rope and lock automatically.
Lock and unlock report and statistics
Platform statistics are required, with the lock
record as the starting point; the unlock
record after the lock is closed as the end
point. One rcord is one trip.
Support 5 authorized VIP numbers
VIP mobile phone number can support SMS
command sending, SMS alarm receiving,
etc.
Support 10 alarms
Steel string cut,
Swipe unauthorized RFID card
Long time unlocking
Wrong password
Enter Geo-fence
Exit Geo-fence
Low battery
Open back cover
Motor stuck lock
Speeding
The alarm can be sent to the VIP mobile
phone number via short message or sent to
the platform via cellular network.
(such as GPRS/3G/4G network).
In the tracking mode, the mileage
accumulates continuously; in other modes,
there is a large error in the accumulated
mileage value, it is not recommended for
reference.
Blind area supplementary report
The maximum number of cached
location data and switch card reports:
2,000 pieces
The Swipe card reports and the location
data are saved in the same area of flash.
Remote firmware upgrade(FOTA)
Deep sleep mode
Tracking mode
Standby mode
Deep sleep mode: It is only allowed to
swipe the card to unlock, charge to wake up,
and the Cellular communication module
doesn’t work and didn’t send data. If the
current battery level is less than 5%, it will
To Next Page
Loading...
