10 - 40
cube
For all maintenance operations it is good practice to use work gloves to protect
your hands.
• It is the duty of the user to perform all the maintenance operations on the device reported in
this manual.
• If a malfunction not indicated in this manual occurs, disconnect the power supply to the device
and consult your dealer and/or JONIX S.p.A..
• Only specialised personnel authorized by JONIX S.p.A., can perform maintenance operations
other than those specified in this manual.
ATTENTION!
BEFORE CARRYING OUT ANY MAINTENANCE OPERATION MAKE SURE THAT
THE DEVICE IS NOT AND CANNOT ACCIDENTALLY BE POWERED ELECTRICALLY.
YOU MUST THEREFORE UNPLUG THE DEVICE BEFORE CARRYING OUT ANY
MAINTENANCE.
• Clean the ionising tubes every time it is shown on the display.
• Do not put back the mesh on the ionising tube if it is even partially wet.
• Check that the earthing spring is in contact with the outer mesh once the ionising tube have
been screwed back into place. Otherwise contact the manufacturer.
• Do not use liquid cleaners, sprays, soap or other products directly on the device.
For the maintenance and cleaning operations (see chapter 7 "Maintenance") of the device we
remind you that:
To Next Page
Loading...