EasyManua.ls Logo

Jonix cube - 7.2.2 Cleaning the filter

Jonix cube
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29 - 40
cube
OFF
21
22
23
Fig. 22: Remove the filter cover by pressing
the sides and pulling towards you.
Fig. 23: Wash the mesh filter under running
water and dry it with a microfibre cloth.
In the case of rooms with high quantities of dust, it is advisable to reduce the
time required to maintain the device in operation and remove traces of dust and
residues that obstruct the air flow.
Clean the filter at the bottom of the device during every ionizing tube maintenance operation.
7.2.2 Cleaning the filter
Fig. 21: Switch the ioniser off by
switching the On/Off button to O.
Remove the plug connected to the mains.