19 - 40
cube
04
6.3 OPERATING SITE CHARACTERISTICS
The device must not be installed in an explosive environment due to the presence
of electrical and electronic equipment not specially designed.
Do not place the device in environments where there are flammable gases, acidic,
aggressive and corrosive substances that could damage it.
The environment in which the device is placed must have the following characteristics:
- air temperature between 0°C and 40°C;
- relative air humidity below 80%.
Ensure free spaces around
the device for the purposes of
correct ventilation.
• Do not place the device outside.
• Do not move the device by pulling the power cord.
• Turn off and unplug the device before moving it.
6.3.1 Position of the operator
During operation, the presence of the
operator in the vicinity of the device is not
required.
For maintenance, the operator must access
the top cover as shown in the figure.
Fig. 4: Position of the operator for
maintenance operations.
To Next Page
Loading...