16– English
DRIVING
3. On FR 2111, FR 2111 M
Put the gear shift lever in the N position
(neutral).
Starting the engine
1. Lift up the cutting unit by pulling the lever back-
wards to locked position (transport position).
2. Apply the parking brake. This is done as follows:
• Press down the parking brake pedal (1).
• Press in the lock button on the steering
column (2).
• Release the parking brake pedal while
keeping the button pressed in.
The parking brake lock is automatically disengaged
when the parking brake pedal is pressed down.
The FR 2111, FR 2111 M has the brake pedal and
lock button on the right-hand side.
Before starting
• Read the safety instructions and information
concerning the placement of controls and
functions before starting.
• Carry out daily maintenance before starting
(see the maintenance schedule).
Adjust the seat to the desired position.
IMPORTANT INFORMATION
Do not press down the reversing lock button
on the lever when engaging the neutral
position. Otherwise this will activate the start
lock function.
1
2
N
8009-249
6007-002H
8009-253
8009-430
IMPORTANT INFORMATION
The air intake grille in the engine cover
behind the driver’s seat must not be
blocked by, for example, clothing, leaves,
grass or dirt.
Impaired cooling of the engine. Risk of
major engine damage.
To Next Page
Loading...
