18– English
N
STOP
START
8009-257
6007-010H
8009-248
8009-253
DRIVING
WARNING!
Never run the engine indoors, in
enclosed or badly ventilated
areas. Engine exhaust fumes
contain poisonous
carbon monoxide.
7. Once the engine has started release the ignition
key back to the neutral position.
Move the throttle to the required engine speed.
When mowing 3/4 to full throttle.
IMPORTANT INFORMATION
Gear changes between forward gears must
not be made while the machine is moving.
The engine must be disengaged during each
gear change.
Stop the machine before changing between
forward and reverse gears, otherwise this
may result in damage to the gearbox.
Never use force to engage a gear. If a gear
does not engage immediately, release the
clutch pedal and press it down again. Now try
to engage the gear again.
Driving the Rider
1. Release the parking brake by pressing down the
brake pedal.
2. On FR 2113, FR 2116
Carefully press down one of the pedals until the
required speed is obtained.
Pedal (1) is pressed down to travel forwards and
pedal (2) to reverse.
On FR 2111, FR 2111 M
Disengage the engine and select the required
gear.
The lock button must be held in to engage
reverse gear.
• Gears 1-4 are used for mowing
• Gears 4-5 are used for transporting
Starting can take place independent of which
gear is selected.
To Next Page
Loading...
