Jorvik Jet-E1 - Starting the Tricycle

Jorvik JMT Mid Drive Electric Mountain Trike
Page | 32
How to Start Up the Tricycle
Walk Assist Mode
The walk mode is operated by tapping the
(-) buon on the control unit unl a small
person is walking next to a bicycle is
displayed. As in the image. Once that mode
is engaged, holding down the (-) will
acvate the walk assist unl you release
the (-) buon.
The thumb throle can also be used to
assist in walking up to 3mph. It is not to be
used to go up hills.
On the baery, switch the power
buon to the ‘On’ posion. Hold down
the power buon on the le-hand side
control switch unl the display lights
up.
To change the pedal assist level, use the
‘+’ and ‘-‘ buons.
While not riding the display can be
turned o by holding the power buon
once more.
The LCD display has various funcons
that can be used while riding (see the
accompanying C961 display manual for
JMT 9 and C18 for JMT 7 and 13).