5 Maintenance
5.1 Lubrication instructions (supplementary to the standard
JSK36D)
1 Guide blocks 3 Lever fulcrums
2 Lever guide
Recommended after every 50,000 km or as needed (e.g. lock is
malfunctioning)
1. Lightly grease the contact surface of the guide blocks (1) of
the second safety latch.
2. Lightly grease the contact points of the lever guide (2).
3. Lightly grease the lever fulcrums (3).
Grease specification
We recommend JOST high-performance lubricant (Art. No.
SKE 013 440 000).
ADVICE!
For all other maintenance instructions, please refer
to Installation & Operating Manual JSK36/37.
EN
MUB 002 013 M30 (REV--) 02-2024 19
To Next Page
Loading...
