Safety
Please read this user manual carefully before operating the YDFLP fiber laser. It provides
essential information regarding safety, product operation, and other necessary reference
information. For the purpose of safety operation and maximizing the performance of the fiber
laser, please strictly follow the safety notifications as below:
● Make sure the +24VDC power supply is connected in the correct way. Inappropriate
connection might spoil the product.
● You can’t open the cover of this product without the permission of JPT. It might cause
safety issues and invalidate the warranty.
● Please wear laser goggle, as shown in Fig.1, all the time during the operation. This laser
module carry a Class 4 Laser rating it emits invisible laser radiation with a rated average output
power of over 10W and rated peak power of over 7kW. Contact with direct or scattered laser
radiation will cause permanent damage to the eyes, burn human tissue and start fires.
● Attention: Even at 0% power setting, the average output power is still about 90mW.
Table 1 Safety Labels
Laser Warning Triangle -L
abel of laser emission (At
tached near the output fib
er)
To Next Page
Need help?
General
