Need help?Do you have a question about the JPT YDFLP-E-30-LP-S and is the answer not in the manual?
General| Laser Type | Fiber Laser |
|---|---|
| Wavelength | 1064 nm |
| Average Output Power | 30 W |
| Beam Quality (M²) | <1.3 |
| Cooling Method | Air Cooling |
| Operating Voltage | 24 VDC |
Describes the JPT E type fiber laser and its applications for marking.
Details the items included in the YDFLP laser package.
Provides detailed dimensional drawings for the YDFLP-E-20&30-LP-S laser module.
Provides detailed dimensional drawings for the YDFLP-E-50-LP-L laser module.
Details the power supply cable and its pinout for the laser.
Explains the RS-232 connector and its pin definitions for PC communication.
Describes the DB25 interface used for connecting the marking control system.
Explains how PIN1-8 control output laser power via TTL signals.
Illustrates the timing sequence of DB25 control signals for laser operation.
Introduces the functions and operation of the JPT GUI Laser Testing Software.
Describes the connection method using a USB to RS232 cable.
Explains how to choose the GUI control mode for laser emission.
Details how to set parameters and initiate laser emission using the GUI.
Explains how to control the MO signal via the GUI interface.
Monitors the laser's running status via pump indicator lights.
Details various alarm conditions and their meanings for the laser system.
To Next Page
