JPT YDFLP-E-30-LP-S - 1. Product Introduction; 1.1 Product Description; 1.2 Packing List

1
1．Product Introduction
1.1 Product Description
JPT E type fiber laser control with standard DB25 interface and powered with 24V/5A(10A)
DC. It is designed for high speed and precise marking applications. The pulse response and
performance are much better comparing to the similar products. Significantly compact size is
perfect for smaller marking system.
Photographs of typical E type fiber lasers are shown in Fig.2 and Fig.3 ( the specific
appearance is subject to actual delivery):
1.2 Packing List
Please refer to the packing list according to table 2.
Table 2 Packing list of YDFLP
Item
Quantity
Fiber Laser
1
Test Sheet
1
Packing List
1
Precautions
1
Figure 2 YDFLP-E-20&30-LP-S
Figure 3 YDFLP-E-50-LP-L