Sailplane Section 10
Activating / Inhibiting Channels
Channels 6–9 can be inhibited, allowing them to be
used as slave channels, in programmable mixes.
Highlight the desired ACT/INH below the appropriate
channel. Press the Selector to inhibit or activate the
channel.
Wing Type
This screen allows the selection of V-tail, dual flap and,
when dual flaps are activated, aileron-to-flap trim.
To access Wing type in System mode list, rotate the
Selector to highlight Wing TYPE. Press the Selector to
access the wing type screen.
If your sailplane has a V-tail, activate the V-tail function
by highlighting INH and pressing the Selector.
If your sailplane has dual flaps, activate the dual flap
function by highlighting INH and pressing the Selector.
Making dual flaps active also activates the
AILE
FLAP trim function in the function menu, which
allows aileron trim to also affect the flaps.
To Next Page
Loading...
Need help?
General
