JR PCM9X II - Activating and Assigning Flight Modes (Continued)

Sailplane Section 8
Activating and Assigning Flight Modes (continued)
To activate the speed and thermal flight modes,
highlight SPEED and press the Selector to select the
desired switch position.
Important: When the speed and thermal flight modes
are activated, launch mode always has priority. Any
time launch is selected it will override speed, thermal or
cruise. To access speed or thermal, the launch switch
must be in the cruise position. Try selecting the various
flight modes several times while looking at the main info
screen and you’ll quickly become familiar with the
switch priority.
Note: On the main info screen, the flight mode that is
activated will be displayed on the top center of the
screen.
Switch A Switch B
Land Speed
Cruise enables Cruise
Launch(Has Priority) Thermal
At this point, you must decide which 3-position switch
you prefer to assign the speed and thermal flight modes
to. We recommend starting with the Flight Mode (right 3
position) switch, as this is a convenient place. Rotate
the Selector until the desired switch is highlighted and
press to select.
FMOD SW Right 3-position
Flight Mode switch
AUX4 SW Left 3-position Flap switch