JRC JFC-7050 - Menu: Time;Date and Input;Output

- 27 -
Operation
9.3. Time/Date
9.3.1. Reference
Available to adjust the collect local time by the UTC time from the GPS.
( The default setting is incorrect every the country.)
9.3.2. Time Format
Sets you preferred time between 12 hour and 24 hour.
(The default setting is 12 hour.)
9.3.3. Date Format
Sets you preferred date among YY-MM-DD, MM-DD-YY or DD-MM-YY.
(☞ The default setting is MM-DD-YY.)
9.3.4. Month Format
Setup the character of month(Ex: 1, 2, 3…or JAN, FEB, MAR…)
(☞ The default setting is Character.)
9.4. Input/Output
9.4.1. Output Sentence
The JFC-7050 allows customizing the NMEA.0183 sentence.
NMEA
Description
Default
$GPDBT
Depth below transducer
On
$GPDPT
Depth
On
$GPMTW
Water temperature
Off
$GPTLL
Target latitude and longitude
On
$GPVHW
Water speed and heading
Off
$GPGGA
Global positioning system fix data
Off
$GPVTG
Course over ground and ground speed
Off
$GPRMC
Recommended minimum specific GNSS data
Off
9.4.2. Transmit
Available to adjust transmit speed of input/output in each ports.