ġ
4. INITIAL SETTING
4.1 HOW TO OPEN THE EQUIPMENT SETUP MENU..................................4-1
4.2 TUNE ADJUSTMENT ...............................................................................4-2
4.3 BEARING ADJUSTMENT ........................................................................4-5
4.4 RANGE ADJUSTMENT............................................................................4-6
4.5 SETTING OF TRUE BEARING VALUE....................................................4-7
4.6 ANTENNA HEIGHT SETTING (ANTENNA HEIGHT)...............................4-8
4.7 SETTING OF CCRP/ANTENNA/GPS ANTENNA POSITION
(CCRP SETTING) .....................................................................................4-9
4.8 COMMUNICATION PORT SETTING (COM PORT SETTING)............... 4-11
4.9 SECTOR BLANK SETTING (SECTOR BLANK)....................................4-17
4.10 TNI BLANK SETTING (TNI BLANK)......................................................4-19
4.11 SETTING OF PULSE OUTPUT SELECTION
(BEARING PULSES FROM ANTENNA) ................................................4-20
4.12 LANGUAGE SETTING (LANGUAGE) ...................................................4-21
4.13 DATE TIME SETTING.............................................................................4-22
4.14 MAIN BANG SUPPRESSION ADJUSTMENT (MBS) ............................4-23
4.15 ADJUSTMENT OF PERFORMANCE MONITOR (MON) .......................4-25
4.16 MAGNET COMPASS SETTING .............................................................4-27
4.17 GPS RECEIVER SETTING.....................................................................4-28
4.18 DGPS RECEIVER SETTING ..................................................................4-37
4.19 SBAS RECEIVER SETTING ..................................................................4-41
4.20 DISPLAYING GPS RECEPTION STATUS .............................................4-46
4.21 SIMPLIFEDINTER-SWITCH SETTINGS ................................................4-48
5. MEASURES AGAINST NOISE INTERFERENCE IN THE
RADIO EQUIPMENT
5.1 SHIELD OF DEVICES ..............................................................................5-1
5.2 INTER-UNIT CABLES ..............................................................................5-1
5.3 INSTALLATION LOCATION .....................................................................5-1
5.4 GROUNDING............................................................................................5-1
To Next Page
Loading...
Need help?
General
