JRC JMR-9210-6X - Sending a Message in the Message Tray after Editing

6-71 Section 6 Target Tracking and AIS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
6.11.3 Sending a message in the message tray after
editing
1 Click the message to copy in the message list.
2 Click on the [Edit] or [Select] button.
When the AIS Message Tray is displayed by opening the AIS Message Tray submenu:
Click the [Edit] button.
The [Edit and Send AIS Message] dialog box appears, and the AIS message will be copied to
the [Edit and Send AIS Message] dialog box. When a message is sent by specifying an MMSI
code, the MMSI code will also be copied:
When the AIS Message Tray was displayed by clicking the [View Tray] button in the [Edit
and Send AIS Message] dialog box: Click the [Select] button.
The AIS message will be copied to the [Edit and Send AIS Message] dialog box. The MMSI
code is not copied by this method.
０ 2014-06-11 09:32 377470000 @@@@@@...
377470000
@@@@@@@@@@@@@@@@
@@
Test message