JRC JMR-9210-6X - Deleting WPT Data; Editing a Route by Table Editing

Section 9 Route Planning 9-26
9.6.3 Deleting WPT data
1 Select WPT data to be deleted and click on the [Delete] button.
9.6.4 Editing a route by table editing
Memo
Steps 1 and 2 are not required when editing the route that is currently displayed.
1 Click on the [Open] button on the Route Planning bar
Or select the [File operation…] button that is displayed by clicking on the Route Planning menu
button.
The [File operation…] dialog box appears.
2 Select the route file to be edited and click on the [Open] button.
Memo
If [Read only] is selected, the file overwrite function is disabled. To overwrite the existing
file, clear the item before opening the file.
The route file is displayed on the [Route Planning] dialog box.