Section 5 Basic Operation of the Radar 5-22
5.4.4 Using video processing (Echo Process)
This function reduces undesirable noise and enhances targets.
Note
• When viewing a radar beacon, SART signal, or fast moving target on the radar display, select
[Process Off] (video process off).
• If video processing mode is set to [CORREL], a high speed target is less-visible .
1 Click on the RADAR Signal Processing Setting button in Radar signal information.
The [RADAR Process] dialog box appears.
2 Select the video process mode from the list in [Echo Process].
Radar signal processing setting button
To Next Page
Loading...
