14-79 Section 14 Creating a User Chart/ Updating a Chart Manually
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
14.8.1 Displaying the Manual Update submenu
By selecting [Menu] - [Chart] - [Manual Update], the selected chart can be updated manually.
Restrictions
Multi-screen display is disabled at manual update of a chart. Even if multi-screen display is attempted
prior to the commencement of manual update, the mode is switched to Single View if manual update is
commenced.
Note:
(1) In edit mode, the duration-dependent attribute is disabled temporarily. The objects that are hidden
at the current time may be displayed.
(2) Up to 100 objects can be edited from the start of editing to the saving of the editing by pressing the
Save button.
(3) Charts to be edited can be saved 50 times until they are updated.
(4) When a chart to be edited is updated, all the manual updates up to then are hidden. The review is
also disabled. The editing history can be checked by Update
log of each chart.
Note:
(1) While the manual update tool bar is active, the Chart Symbol setting is switched from “Simplified”
to “Paper Chart” forcibly. When “Simplified” is selected before the Manual Update tool bar is
displayed, the setting is reset to the original state after termination of the tool bar.
(2) When the cursor is in AUTO mode, a manual update object can be edited only when the manual
update tool bar is displayed and when the Manual Update tool bar is hidden, only the property
screen display can be executed.
1. Click on the [Menu] button on the left toolbar.
The menu is displayed.
2. Click on the [Chart] button on the menu.
3. Click on the [Manual Update] button on the submenu.
The "Manual Update" toolbar is displayed.
"Manual Update" toolbar
To Next Page
Loading...
