JRC JMR-9210-6X - Page 291

9-69 Section 9 Route Planning
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Cause
The planned radius is beyond the MAX turning radius.
The planned radius is under the MIN turning radius.
The course angle of leg is beyond the maximum.
The planned speed is beyond the MAX planned speed.
The planned speed is under the MIN planned speed.
The planned ROT is beyond the MAX ROT.
The planned ROT is under the MIN ROT.
The leg length is shorter the MIN Leg length.
The straight route cannot be created.
Updating error display
By clicking on the re-check button, the latest error information is displayed by rechecking the
information.
Sorting error display
By clicking on any of the items on the title line, error display can be sorted based on the item. A sort
mark ( or ) is displayed on the title of the selected item.
Whenever an item is clicked on, the error display is sorted based on the ascending ( ) or the
descending ( ) order.
Verifying an error target on the list
When an error is detected, WPT of the error target is highlighted in yellow.