Section 14 Creating a User Chart/ Updating a Chart Manually 14-66
3 Adjust the parameters on the object property dialog box.
• Specifying a bearing: Display a numeric value input keyboard by clicking on the [Set] input
box and enter a bearing (0 to 359°).
• Specifying a current drift: Display a numeric value input keyboard by clicking on the [Drift]
input box and enter a current drift (0 to 99.9).
• Selecting Actual/Predicted: Select the check box of either Actual or Predicted.
When Actual is selected, a tidal stream mark of a solid line is displayed. When Predicted is
selected, a tidal mark of a broken line is displayed.
• Specifying date/time: Display a calendar + time picker by clicking on the calendar button
and enter a date and a time in the [Time(UTC)] input box.
For the method of using a numeric value input keyboard, refer to "3.16.2 Name and function of
each section of the keyboard" and for the method of using a calendar + time picker, refer to
"3.17 Setting a Date and a Time [Calendar Operation)".
4 To create an object on another position continuously, repeat Steps 2 and 3.
Moving a tidal stream mark
1 Click the right mouse button on the tidal stream mark that is set.
The menu is displayed.
2 Click on [Move this object].
3 Click on the required destination position.
Creating an object by specifying the latitude and longitude
1 Click on the [Enter POSN] button on the drawing toolbar.
The [Enter Position] dialog box appears (Refer to "14.2.6 Creating an object by specifying
latitude and longitude").
2 Enter the latitude and longitude of the position on which an object is to be created and
click on the [Enter] button.
An object is created on the position of the specified latitude and longitude and the property
information is reflected in the object property dialog box. (Refer to "14.2.8 Object property
dialog box").
3 Adjust the parameters on the object property dialog box.
4 To create an object on another position continuously, repeat Steps 2 and 3.
To Next Page
Loading...
