JRC Radar 3000 User Manual

5
2.1 CONTROL PANEL
① Stand-by/off Key
・ Turn ON power to Display and Scanner and activates 90 second countdown
timer.
・ Press STBY/OFF key to Stand-by mode while in the Transmitting mode.
・ Press STBY/OFF and X-MIT/OFF keys simultaneously to shut off.
② Transmit/off Key
・ Turn ON transmitter which activates Radome.
・ Press STBY/OFF and X-MIT/OFF keys simultaneously to shut off.
③ J-DIAL
・ Push to select SEA, RAIN, GAIN and TUNE for control.
SEA reduces sea returns.
RAIN reduces rain or snow returns.
GAIN controls strength of target returns.
TUNE manually fine tunes receiver by peaking tuning bar (No tuning
bar in AUTO tune).
・ Control the SEA, RAIN, GAIN, TUNE, VRM, EBL, Contrast for desire
setting.
④ VRM/EBL key
・ Enable a VRM or EBL for display. A short press to turn on or off selected
VRM or EBL. Press and hold, selects VRM or EBL for control by using J-
DIAL.
⑤ JOYSTICK
・ Position cursor setting.
・ Enables MENU for setups and selection.
⑥ GUARD Key
・ Enables or disables Guard Zone alarm as set with the JOYSTICK and I or O
operation.
I=InmodealarmO=OutmodealarmBlank=OFF
OPERATING CONTROLS AND FUNCTIONS
5
2.1 CONTROL PANEL
① Stand-by/off Key
・ Turn ON power to Display and Scanner and activates 90 second countdown
timer.
・ Press STBY/OFF key to Stand-by mode while in the Transmitting mode.
・ Press STBY/OFF and X-MIT/OFF keys simultaneously to shut off.
② Transmit/off Key
・ Turn ON transmitter which activates Radome.
・ Press STBY/OFF and X-MIT/OFF keys simultaneously to shut off.
③ J-DIAL
・ Push to select SEA, RAIN, GAIN and TUNE for control.
SEA reduces sea returns.
RAIN reduces rain or snow returns.
GAIN controls strength of target returns.
TUNE manually fine tunes receiver by peaking tuning bar (No tuning
bar in AUTO tune).
・ Control the SEA, RAIN, GAIN, TUNE, VRM, EBL, Contrast for desire
setting.
④ VRM/EBL key
・ Enable a VRM or EBL for display. A short press to turn on or off selected
VRM or EBL. Press and hold, selects VRM or EBL for control by using J-
DIAL.
⑤ JOYSTICK
・ Position cursor setting.
・ Enables MENU for setups and selection.
⑥ GUARD Key
・ Enables or disables Guard Zone alarm as set with the JOYSTICK and I or O
operation.
I=InmodealarmO=OutmodealarmBlank=OFF
OPERATING CONTROLS AND FUNCTIONS

JRC Radar 3000 Specifications

General

Brand	JRC
Model	Radar 3000
Category	Radar
Language	English