To Next Page

To Previous Page

38 MAINTENANCE

SECTION 5

The purpose of this section is to provide servicing instructions for the service

technician. The RADAR 3000 is designed to provide long periods of trouble

free operation. However, environmental and other factors may required this

equipment to be serviced.

MAINTENANCE

This radar equipment contains high voltage. Adjustments require

specialized service procedures and tools only available to quali-

fied service technicians. There are no user serviceable parts or

adjustments. The operator should never remove the radar unit

cover nor attempt to service this equipment. When servicing this

equipment, it is important that the technician comply with all

safety precautions set forth in this manual.

The high voltage can cause a severe personal injury by the elec-

tric shock.

5.1 PREVENTIVE MAINTENANCE

Continuous satisfactory operation of the radar can depend on how well it is

treated. The following maintenance tips can save you time and money, and will

help avoid premature equipment failure.

1. Always keep the equipment as clean as possible. Remove dirt, dust, or wa-

ter-spray from the display and scanner during the boat clean up. These units

are “water resistant” but not “water proof”. Do not immerse.

2. During routine ship’s maintenance, inspect the radar system for the follow-

ing points:

(1) Check all hardware for tightness.

WARNING