To Next Page

To Previous Page

SECTION 6

AFTER-SALES SERVICE

★ When asking for repair

When a system failure is suspended, read Section 3 carefully and re-check the ab-

normal part.

If it is still considered to be a failure, stop the operation at once and consult with the

dealer you purchased the product, our sales department or your nearest branch or

business office.

● Repair within the warranty period

To verify ownership and warranty registration, you should take a few minutes and

full out your warranty registration card in the front of the manual. It is very impor-

tant that you take time to fill out this card.

The warranty registration card should be returned to the nearest JRC service center

immediately after your purchase in order to receive full warranty benefits.

Read attached the warranty card contains important information on warranty limitations.

● Repair after the warranty period has expired

If the product is recoverable by repairing, we will repair it upon your request.

● Items to be identified

✩ Product name, model name, manufacturing date and serial number

✩ Failure condition (as detailed as possible: see the Radar Failure Checklist on

Page 41.)

✩ Your company/organization name, location and telephone number

★ Recommendation of maintenance inspection

Although it depends on your operating condition, the performance of the product

may be lowered due to parts wear.

We recommend maintenance inspection, apart from the normal maintenance work.

For maintenance inspection, consult with the dealer you purchased the product, our

sales department, or your nearest branch or business office.

Note that this maintenance inspection will be charged.

For detail of after-sale service, contact the dealer you purchased the product, our sales

department, or your nearest branch or business office.