JUKI DLN-9010 - Page 213

LU-1508NS, 1508NH, 1510N, 1510N-7, 1509NS, 1509NH, 1511N-7 (September, 2003) 3/4
14
13
6.1
6.6
6.2
20
7.2
2.5
6.2
20
2.5
3.5
6.2
7.2
20
2.5
6.2
20
7.2
2.5
6.2
20D
8.5
20
2.5
6.4
13.5
EXCHANGEABLE GAUGE PARTS
Description Throat plate Feed dog Notes
Description Presser foot Walking foot Notes
Lower fittings standard
(equipped on machine)
Lower fittings standard
Lower fittings
(no groove)
Lower fittings for thin
needle
Fitting for piping
Lower fittings for tape
binding
B1109-563-000 (area: 33.2×6.6)
B1109-053-00A (area: 31.7×6.6)
B1109-562-A00 (area: 31.7×8.8)
B1109-563-C00 (area: 30.2×6.8)
213-49303
(needle hole: 2.5×7.2)
(groove in front and back)
213-49204
(needle hole: 2.5×3.5)
(groove in front and back)
B1613-563-000
(needle hole: 2.5×7.2)
(groove at back)
B1613-053-000
(needle hole: 2.5×7.2)
(No groove)
B1613-563-B00
(needle hole: φ2.4)
B1613-053-B00
(needle hole: φ1.9)
B1613-562-A00
(needle hole: φ2.5×8)
B1613-563-C00
(needle hole: φ2.5)
Equipped on LU-1508N, LU-1508NH,
LU-1510N
Stitch length up to 9mm
(10mm in case of LU-1508NH)
Equipped on LU-1510N-7
Stitch length up to 9mm
Equipped on LU-563N
Stitch length up to 9mm
Not applicable to LU-1510N-7
Stitch length up to 9mm
Not applicable to LU-1510N-7
Stitch length up to 9mm
Not applicable to LU-1510N-7
Stitch length up to 9mm
Not applicable to LU-1510N-7
Stitch length up to 7mm
Not applicable to LU-1510N-7
Upper fittings standard
Upper fittings
left handed
B1525-241-HA0
B1525-053-0A0
B1524-245-0A0
(width: 9.6mm)
B1529-245-0AC
(width: 7.7mm)
(with groove)
B1470-241-H00
(width: 6.2, needle hole: φ2.8)
D1470-241-E0A
(width: 6.2, needle hole: φ2.8)
(front-open)
213-50004
(width: 6.2, needle hole: φ2.8)
(with groove, teeth at the toe)
B1470-053-000
(width: 4.5, needle hole: φ2.8)
B1470-053-C00
(width: 4.5, needle hole: φ2.3)
B1470-245-000
(width: 6, needle hole: φ2.2)
(front-open)
B1476-245-00C
(width: 5.7, needle hole: φ2.3)
(with teeth)
Equipped on LU-1508N, LU-1508NH
LU-1510N, LU-1510N-7
Stitch length up to 10mm
Stitch length up to 10mm
Stitch length up to 10mm
Suitable for thick thread.
Stitch length up to 10mm.
Stitch length up to 10mm
Stitch length up to 6mm
Stitch length up to 6mm
15
www.egemakine.com.tr