ASN-697, ASN-695 (September, 2003) 1/2
● The ASN Series machine has been provided with the capability
of sewing light-weight materials, and a low-tension sewing
feature to enable sewing according to the material to be sewn,
as well as achieving consistent high-quality seams free from
slip-off seams at curved parts of the material.
● The machine offers high-speed performance with its maximum
sewing speed of 8,000rpm. With this feature, the machine
makes the most out of its original capabilities as a serging
machine to help dramatically increase productivity.
● The machine is fully equipped with mechanisms developed
through a full consideration for seam quality. The machine,
therefore, supports any type of material.
● The machine can be adjusted externally according to the
material to be sewn.
● The ASN-697 is provided as standard with a cloth control
device, curl blower, in-curve and out-curve detecting sensor,
cloth feed table air blower, as well as other helpful
mechanisms. When the machine sews crotches or joins the
seat seams of slacks, the in-curve and out-curve detecting
sensor detects sharp in-curves and out-curves to automatically
control the sewing speed.
Automatic shirring is also possible at desired sections of the
material by programming sewing data. The machine adopts
an air-driven feed mechanism for feeding materials while
preventing the material from slipping off the needle entry
point.
Automatic Serging Machine
ASN-697
(High-grade type)
ASN-695
(Standard type)
WHEN YOU PLACE ORDERS
ASN695
ASN697
ASN-697
＊2-pedal unit: Stacker pedal ＋ Differential feed pedal
＊Differential feed device and table air blower is equipped as standard with the machine
＊2-pedal unit: Stacker pedal +Differential feed pedal
Overedging
width (mm)
Code
4.0 AA
4.8 AB
5.6 AC
Power supply Code
For General
Single-phase 220〜240V 07
Export
3-phase 200〜220V 11
For CE Single-phase 220〜240V 34
Auxiliary table Code
Not provided Z
Provided A
Silencer Code
Not provided Z
Provided A
Cloth control
device
Cord
Not provided Z
Provided A
Cloth receiving
board
Cord
Not provided Z
Provided A
Stacker, pedal, differential feed mechanism, cloth feeding device and table air blower
Code
Stacker Pedal
Differential
Air blower
Cloth feeding
SS40 SS42 Stacker
Differential
2-pedal
＊
feed device device
feed
××××× × × ×Z
●×●×× × × ×A
×●●×× × × ×B
●×××● ● × ×C
×●××● ● × ×D
×××●× ● × ×E
●×××● ● ● ×H
●×××● ● × ●M
×●××● ● × ●N
●×●×× × ● ●P
Stacker, pedal, differential feed mechanism, cloth feeding device and table air blower
Code
Stacker Pedal
Cloth feeding
SS40 SS42 Stacker
Differential
2-pedal
＊
device
feed
××××× ×Z
●×●×× ×A
×●●×× ×B
●×××● ×C
×●××● ×D
×××●× ×E
●×××● ●M
×●××● ●N
To Next Page
Loading...
