JUKI HZL-UX8 Series - Presser Foot Lifting Adjustment; Position of the Presser Foot Lifting Motor

– 32 –
6-19 Presser foot lifting
6-19-1 Position of the presser foot lifting motor
○
Remove the top cover, the spool cover and the front panel.
Adjustmentprocedure
 1.Loosenthemotorbracketsetscrew.
 2.Removethebacklashfromthepresserfootpressurelevergearandthepresserfootliftingleverintermedi-
ate gear (reduction gear). Then, tighten the setscrew.
Presser foot pressure lever gear
Setscrew
Presser foot lifting
lever intermediate gear
(reduction gear)