JUKI HZL-UX8 Series - Pattern Selection and Features; Pattern selection method; Pattern selection capacity; Total number of patterns

– 2 –
(8) Pattern selection
• Selection is made on the touch panel
(9) Number of patterns that can be selected
• Max. 70 patterns
(10) Number of patterns
• 368
(11) Automatic threading device
•Thehooksectionmakesaturnbyloweringthethreadinglever,andautomaticallyreturnstoitsoriginalposition
after completion of threading.
(12) Automatic lock stitch
WhenthebacktackingswitchisturnedON:
• Straight stitch: Three stitches are sewn in normal direction and three stitches are sewn in reverse direction at
thebeginningandend(thereverseswitchisturnedON)ofsewing.
Amount of feed: Same with the preset amount of feed
• Other patterns: Zero-feed is inserted and one each stitch is sewn in the normal and reverse directions at the
beginningandend(thereverseswitchisturnedON)ofsewing.
Amount of feed: Fixed at 0.4 mm
(13) Buttonholing
Auto-returntypefullautomaticbuttonholing
Buttonholing size detection
(14) Save and call patterns
Selectedpatternsandpatternsettingscanbestoredinmemory.
Inaddition,thepatterncanbecalledupfrommemoryforsewing.
Numberofpatternsthatcanbestoredinmemory:10(folders)
(15) Helpful messages
• Presser foot lifting lever
• Buttonholing foot
• Display of pattern storage limitation
• Pattern clear prompt
• Memory storage
• Acceptance of setting change
• 2-needle setting
• Motor lock
• Straight stitch selection
•Throatplatehascomeo󰀨
• Top feed