JUKI KE-2080 - Replacing the Lens Filter

Maintenance Guide
4-4
4-4. Replacing the Lens Filter
(1) Detach the light assembly from the head plate using the procedure described in "Replacing
the OCC Assembly".
(2) Remove the washer assembled hexagon socket head cap bolt, collar and shoulder screws
to detach the light filter U support, lens filter and guide plate.
(3) Remove the countersunk-head screws to detach the lens filter
(4) Reassemble the components in the reverse order of disassembly.
(5) After the filter has been replaced, it is necessary to adjust the polarizing filter and OCC light.
(See 4-8. "List of Readjustment Items After Replacement".)
Figure 4-4-1 Replacing the Lens Filter
Shoulder
screw (
u
2)
Countersunk-head
screw (u 4)
Washer assembled
hexagon socket head cap
bolt (
u
1)
Collar (u 1)
Light filter U support (u 1)
Lens filter (u 1)
Guide plate (u 1)