JUKI KE-2080 - Replacing the Plastic Rail

Maintenance Guide
1-21
1-7. Replacing the Plastic Rail
1-7-1. Replacing the X-Axis Plastic Rail X-Axis Plastic Rail (Part No. 40046023)
(1) Loosen the SL3051292TN and NM6060001SC, and then detach the X-axis plastic rail from
the nut plate and X-axis frame assembly.
(2) Loosen the SL6040892TN and detach the cable clamp X.
(3) Open the flap of the X-axis plastic rail to remove the cables, and replace the X-axis plastic rail.
(4) Reassemble the components in the reverse order of disassembly. At this time, pay special
attention so that the cables in the plastic rail are properly arranged and not entangled.
Figure 1-7-1-1
* Figure when viewed
from the rear
Cable clamp X
Cable clamp rubber X
X-axis plastic rail
Nut plate
X-axis frame assembly
CB spacer