1-8-2. Checking the Cable Marking (X)
(1) Check the marking position of the XY veyor-cable (40058385).
(Place the marks at a position 350mm from the CN805 connector end.)
For the machine with the extra specifications, the following cables are used.
XY veyor-cable (E) 40059779
Y veyor-cable (E) 40059789
This instruction also applies to the following pages.
Figure 1-8-2-1
(2) Check the marking positions of the 1394 robot cable (40044517) and the optical fiber cable
7M (40044543).
(At this time, place a mark at a position 730mm from the connector end of the robot cable
and at a position 290mm from the connector end of the fiber cable.)
1394 robot cable
To Next Page
Loading...
