19
(2) Inputting the Y size
The setting exceeding 100% is dangerous
since needle and the cloth presser inter-
feres with each other and needle breakage
or the like will occur.
Press ITEM SELECT key
to display the
C002 Y size.
Press DATA CHANGE key
to display the
value you desire.
One of the input methods for the X/Y sizes can be
selected; i.e., by inputting a percentage (%) with
memory switch U064 or by inputting an actual value.
(Initial value: Input in terms of percentage (%))
(3) Inputting the sewing speed
Press ITEM SELECT key
to display the
C004 sewing speed.
Press DATA CHANGE key
to display the
value you desire.
The maximum input range is the maximum sewing
speed of the memory switch U001.
(4) Setting the comment
Press ITEM SELECT key
to display the
C005 comment.
Press EDIT key
to display the comment
input screen.
To Next Page
Loading...
