JUKI LU-2810 - 26. RESETTING THE SAFETY CLUTCH

–25–
26. RESETTING THE SAFETY CLUTCH
Thesafetyclutchfunctionswhenanexcessiveload
isappliedtothehookortheothercomponentsdur-
ing sewing.At this time, the hook willnever rotate
evenifturningthehandwheel.Whenthesafety
clutch has functioned, remove the cause and reset
thesafetyclutchasgiveninthefollowingprocedure.
1) Pressingpushbutton
❶
locatedonthetop
surfaceofthemachinebed,stronglyturnthe
handwheelinthereversedirectionofrotation.
2) Theresettingprocedurecompleteswhenthe
handwheelclicks.
Turn the handwheel by hand, and confirm
that push button
❶
has returned.
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
❶