Need help?Do you have a question about the JUKI LU-2828V-7 and is the answer not in the manual?
General| Stitch Type | Lockstitch |
|---|---|
| Max Stitch Length | 5 mm |
| Motor Type | Servo Motor |
| Needle Bar Stroke | 36 mm |
| Lubrication | Automatic |
| Power consumption | 550 W |
| Needle Type | DP x 17 |
| Hook | Full Rotary Hook |
Details of the sewing machine head's technical specifications and capabilities.
Technical specifications for the sewing machine's control box.
Step-by-step guide for mounting and securing the sewing machine head.
Procedure for mounting and connecting the electrical control box.
Instructions for connecting the main power switch and source cords.
Initial setup and basic explanation of the operation panel functions.
Detailed guide on how to thread the sewing machine head correctly.
Procedures for adjusting needle and bobbin thread tension for optimal stitches.
How to adjust presser foot pressure and use the micro-lifter function.
Guide on how to set and adjust the machine's stitch length.
Steps to reset the safety clutch after overload or malfunction.
Method for manually lifting the presser foot during power failure.
Overview and display elements of the sewing screen.
Information on available sewing patterns and their configuration.
Details on using the bobbin, stitch, and time counters.
Crucial adjustment for needle and hook synchronization.
Procedure for setting the correct timing between needle and hook.
Instructions for adjusting thread trimming knives and bobbin clamp.
Understanding and resolving grease shortage warnings and errors.
Identifying causes and solutions for thread breakage and fraying.
Diagnosing and fixing issues related to stitch skipping.
Causes and corrective actions for loose stitches, especially in reverse feed.
To Next Page
