JUKI LU-2828V-7 - One-Touch Utility Changeover Function

– 75 –
6-2-8. One-touch utility changeover function
In the case the one-touch changeover function is assigned to the custom switch, the stitch length, sewing
speed, etc. can be changed over by pressing the custom switch.
Four di󰀨erent one-touch changeover functions can be set from 1 to 4.
Data that is changed over with the one-touch changeover function
・
Stitch length
・
Needle thread tension
・
Alternating vertical movement amount
・
Presser foot pressure
・
Sewing speed
Refer to
"4-11. Custom switch" p. 39
.
The display of the target data changes and the
number (1 to 4) of the one-touch change over
function is displayed in
❶
while the one-touch
changeover function works.
❶