JUKI MO-6804D - Page 76

– 26 –
Model A B C D E
MO6804D-0E4-30H 11.5 17.5 20 28.5 11
MO6814D-BD6-24H 21.5 14.5 28 32 11
MO6814D-BE6-34H 21.5 14.5 28 32 11
MO6814D-BE6-24H 21.5 14.5 28 32 11
MO6814D-BD6-30H 21.5 14.5 28 32 11
MO6814D-BB6-30P 11.5 10.5 25 35 15
MO6814D-BE6-30P 11.5 10.5 25 35 15
MO6814D-BE6-40H 21.5 14.5 25 28.5 9
MO6814D-BE6-44H 21.5 14.5 25 28.5 9
MO6816D-DE4-30H 21.5 17.5 20 28.5 9
MO6816D-DE4-30H-E35 21.5 17.5 20 28.5 9
MO6816D-DE4-30P 21.5 10.5 28 35 15
MO6816D-FF6-50H 33.5 10.5 20 28.5 9
0 to 1 mm
(2) Position of the looper thread take-up and the looper thread guide
(Unit : mm)
(3) Adjustment value of the looper thread cam
Adjust the looper thread cam timing so that
the looper thread cam releases the looper
thread when the needle tip comes down to
project the undersurface of the throat plate
by 0 to 1 mm.
A
C
D
E
B