JUKI MP-200N Series - Thread Take-up Thread Guide Adjustment

−19 −
Standard Adjustment
(15) Position of the looper link eccentric pin
Position of looper link eccentric pin 2 is adjusted to the maximum stroke of the looper (stroke is large)
at the time of delivery from the factory.
1
2
3
Standard Adjustment
(16) Adjusting the thread take-up thread guide
1
2
™MP-200NL
™MP-200NS
2.5 mm
4 mm
Screws No. 2
and No. 3
Screws No. 3
and No. 4
Equal
Equal
Equal
Equal
Screws No. 4 and No. 5
Screws No. 4 and No. 5