−1 −
1. SPECIFICATIONS
(1) MP-200N SERIES
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Model name
Item
Machine type
Application
Sewing speed
(normal sewing speed)
Stitch length
Needle gauge
Needle
Applicable thread count
Lift of presser foot
Stitch adjusting method
Thread take-up lever
Needle bar stroke
Feed mechanism
Main shaft/hook driving shaft drive
Lubrication
Lubricating oil
Bed size
Space of sewing area
Handwheel size
Transmission belt
Motor used
Table
Specifications
Pin-point saddle stitch
Hand lifter : 5.5 mm Knee lifter : 12 mm
Dial method
Link type
23.8 mm
Rectangular feeding
Bevel gear
Manual
New Defrix Oil No.2 (Equivalent to ISO VG32)
467 mm X 178 mm
265 mm from needle entry point
V belt effective diameter : ø67.4 mm
M type V belt
4P 400W motor (Motor with needle positioner can be used.)
Table for lockstitch machine can be used.
MP-200NS
For pin-point stitching of gents’ suits,
etc. (Light-weight to medium-weight
materials)
Max. 2,000 rpm
(Normal 1,500 rpm)
3.5 to 10 mm Reverse feed stitching
impossible
1.6 mm (standard), 2.0 mm (accessory)
(Optional : 1.2 mm, 2.5 mm)
SHEMETZ 29-C-150 Nm80 to
Nm140 (Standard Nm90)
SCHMETZ 29-C-151 Nm80 to
Nm140 (Standard (Nm100)
Tetron and spun threads/#60 to #30
MP-200NL
For pin-point stitching for ladies’ suits,
etc. (Light-weight to medium-weight
materials)
Max. 1,500 rpm up to feed pitch 8 mm
Max. 1,200 rpm when exceeding feed
pitch 8 mm
10 mm (When needle gauge is 5 mm)
Reverse feed stitching impossible
5.0 mm (standard)
(Optional : 3.0 mm, 4.0 mm)
ORGAN CP X 1J #18U to #22U
(Standard #22U)
ORGAN CP X 12J #19 to #23
(Standard #23)
Tetron and spun threads/#30 to #8
Sewing needle
Hook needle
* The distance from the top surface of the throat plate is when the needle bar is in its upper dead point.
Model
Needle gauge (mm)
Difference in level between needles (mm)
Distance from top surface of
throat plate (mm) *
Sewing needle
Hook needle
MP-200NS
1.6
1.3
MP-200NL
5
1.3
7
5.7
29C150
29C151
7
5.7
CPx1J
CPx12J
To Next Page
Loading...
Need help?
General
