Julabo F500 - Page 29

F250, F500, F1000
• Switch off the unit
• Wait for approx.2 seconds
• Switch on the unit
If the error occurs again, a remote diagnosis must be made.
If the unit cannot be returned to operation, contact an authorized
JULABO service station.
(1)
Disturbances that are not indicated.
Overload protection: a) for cooling machine
b) for pump motor
After a short cooling interval, the unit will automatically start
running.
Main fuse:
The main switch (1) of the device is also a circuit breaker.
After a cooling period, the unit can be switched on again.
1.951.4806-V2 29