To Next PageTo Next Page
Need help?Do you have a question about the JUMO dTRANS T03 J and is the answer not in the manual?
General| Type | Temperature transmitter |
|---|---|
| Protection class | IP65 |
| Storage temperature | -40 to +85 °C |
| Input Type | RTD, thermocouple |
| Output Type | Analog output |
| Display | Optional LCD display |
| Communication | HART, Modbus |
| Accuracy | ±0.1% of full scale |
| Housing material | Plastic |
| Measurement range | Depends on sensor type |
| Electrical connection | Screw terminals |
Essential safety precautions and warnings for proper handling and operation of the device.
Explains how to construct the correct order code based on device type, input, output, and extensions.
Electrical connection diagram and terminal assignments for the Type 707030/... model.
Illustrates typical wiring configurations for current and voltage outputs.
Specific wiring example for voltage output configurations.
Details the adjustable parameters like range, TAG number, and probe response.
Diagrams showing how to connect the device for calibration and configuration.
Guide on how to calibrate the measurement range of the transmitter.
