To Next PageTo Next Page
Need help?Do you have a question about the JUMO dTRANS T03 T and is the answer not in the manual?
General| Housing material | plastic or aluminum |
|---|---|
| Protection type | IP65 |
| Operating temperature | -40 to +85 °C |
| Storage temperature | -40 to +85 °C |
| Measurement Range | Depends on sensor type |
| Input | RTD, thermocouple |
| Output Signal | 4-20 mA, 0-10 V |
| Accuracy | ±0.1% of span |
| Display | Optional LCD |
| Communication Protocol | HART |
| Electrical connection | M12 connector |
| Process connection | Various threaded connections (G1/2, G1/4, NPT) |
General safety precautions and warning symbols for safe operation.
Wiring diagram and terminal assignments for model J.
Wiring diagram and terminal assignments for model B.
Wiring diagram and terminal assignments for model T.
Wiring diagram and terminal assignments for model BU.
Wiring diagram and terminal assignments for model TU.
PC and software requirements for the setup program.
Steps for fine calibration and range calibration.
Technical specifications for the input of resistance thermometers.
