Need help?Do you have a question about the JUMO ecoTRANS pH 03 and is the answer not in the manual?
Settings for relay output and binary output functions.
Configuration options for analog output signals.
Describes how to enter and initiate the calibration process.
Explains the differences and procedures for one-point and two-point calibration methods.
Lists setting options for binary output functions.
Technical specifications for measurement inputs.
Settings for relay output and binary output functions.
Configuration options for analog output signals.
Describes how to enter and initiate the calibration process.
Explains the differences and procedures for one-point and two-point calibration methods.
Lists setting options for binary output functions.
Technical specifications for measurement inputs.
General| Measurement range pH | 0 to 14 pH |
|---|---|
| Measuring range redox voltage | -1500 to +1500 mV |
| Input | pH, Redox, Temperature |
| Power supply | 12 to 30 V DC |
| Protection type | IP65 |
| Protection class | III |
| Temperature compensation | Automatic |
| Electrical connection | Screw terminals |
| Housing material | Plastic |
| Product group | Transmitter |
| Output signal | 4 to 20 mA |
| Display | LCD |
| Operating temperature | -20 to +60 °C |
| Storage temperature | 70 °C |
| Accuracy | ±0.02 pH, ±1 mV |
| Weight | Approx. 500 g |
To Next Page
